Compliant installation
Fast turnaround
Works with all major brands
About this Service
EV charger installation is one of the fastest growing electrical jobs in Perth as more homeowners switch to electric vehicles. A proper installation involves assessing existing switchboard capacity, running a dedicated circuit, mounting the charger correctly, and testing for compliance before it's signed off. WA law requires a licensed electrician to complete EV charger installation.
EV charger installation in Perth homes
A wall charger is much faster than charging from a normal power point, but it needs its own circuit and a switchboard that can carry the extra load. That is why the first step is always a check of your board and supply.
What we check first
- Whether there is space on the switchboard for a new circuit and safety switch
- Whether your supply can carry the charger on top of air con, cooking and hot water
- The cable route from the board to where you park
- Whether you have single phase or three phase power
Western Power allows a 7 kW single phase charger on a standard connection. Larger chargers may need an upgraded connection, and installers must not exceed the capacity of your supply. If you are still choosing a car or charger, talk to us first so you pick one that suits the house.
Where you park matters too. A charger mounted close to the switchboard means a shorter cable run and a lower price, while a carport at the far end of a block needs a longer, heavier cable. We show you the options and the cost difference at the quote so you can decide.
Once it is installed, we show you which circuit and safety switch on the board belong to the charger, so you know what to check if it ever trips.
Licensed installation in WA
In WA, all electrical installing work has to be done by a licensed electrician. We install the circuit and charger, test it, and give you an Electrical Safety Certificate for the work.
You get a fixed price before we start. If your board needs an upgrade first, we tell you at the quote, not on the day.
Where we do this work
We install home EV chargers across Perth's northern suburbs and the inner west.
Northern suburbs: Clarkson, Mindarie, Merriwa, Quinns Rocks, Burns Beach, Iluka, Currambine, Joondalup, Banksia Grove and Wanneroo.
Inner west: West Leederville, Wembley, Daglish, Mount Hawthorn, Churchlands and Wembley Downs.
Common questions
Can I plug my EV into a normal power point?
You can charge slowly that way, but a wall charger needs its own circuit and should be installed by a licensed electrician.
Will my switchboard need upgrading for an EV charger?
It depends on space and capacity. We check both before quoting, so any board work is known upfront.
What size charger can I have on a standard connection?
Western Power allows a 7 kW single phase charger on a standard connection. Larger chargers may need a supply upgrade.
Call Nuno on 0422 243 640 or send a quote request below.
How We Work
From the first call to the final sign-off, here's exactly what to expect when you book Buetec Electrical for the job.
Call & Assess
Call or book online, and we'll arrange a time to assess the job and confirm what's needed.
Fixed-Price Quote
Once we've assessed the job, you get a clear, fixed price before any work begins.
Fix & Install
Our licensed electrician carries out the work to standard, keeping the site clean and tidy throughout.
Tested and Signed Off
Every job is tested and signed off. Notifiable work is lodged with the network operator and you receive an Electrical Safety Certificate for your records.
Get In Touch
Frequently Asked Questions
Older or fully loaded switchboards may need upgrading to safely support a new charger circuit. This is assessed on site during your quote.
No, WA law requires a licensed electrician to complete EV charger installation for safety and compliance.
A standard home installation usually takes two to four hours, depending on switchboard capacity and cable routing.

Let’s discuss the details


